Description
UV Crystal Drip 8105B (Soft Gel)
Features Crystal Drip Adhesive 8105B is a low-energy a UV curing curing acrylate soft adhesive, ultra-transparent, low-odor, yellowing resistance, good toughness, non-shrinkage, fast curing time, surface drying and good stability.
Application Areas Crystal Drip 8105B is mainly used in handmade crafts, pendant jewelry, modeling and other industries.
Main performance indicators
| sports event | Description of indicators | |
| exterior condition | Colorless transparent liquid | visual assessment |
| Viscosity cps | 1200±10 | Brookfield DV-II Viscometer, 25°C, SC 4-27/60rpm |
| durometer | 60 | GB/T 552-2058 Curing Test |
| index of refraction | 1.5216 | Uncured test |
Curing Properties
Crystal Drip 8105B will cure under 12W LED light, table drying time:
5 minutes on the front — 12W LED light
Reverse 2 minutes —12W LED light
After light curing, wait for cold confirmation before testing.
The final curing depth and surface drying effect is related to the UV light source, light time, and other factors. It is recommended to determine the specific curing time through the test
Curing time
| Initial Curing | Approx. 2min at room temperature |
| Final curing | 10min at room temperature |
| Temperature range | 10°C-70°C |
Usage
UV lamp irradiation curing, the curing rate depends on the adhesive absorbed into the light energy, and light source distance, material transmittance and other factors related.
Do not move and separate repeatedly during operation
The leftover glue must not be poured back into the original package to avoid contamination.
caveat
Avoid contact with eyes, skin and clothing. This product is slightly irritating to eyes and skin. If splashed in the eyes, rinse immediately with plenty of water, if discomfort persists go to a hospital for examination. In case of skin contact, rinse immediately with soapy water. Wash clothing after contact before wearing. Keep out of reach of children.Test results
| hardness | shoreD | 60 |
| bending strength | Kg/mm2 | 28 |
| heat distortion temperature | ℃ | 100 |
| water absorption | % | <0.15 |
| compressive strength | Kg/mm2 | 10.4 |
save (a file etc) (computing)
| Are you afraid of freezing? | be | |
| moisture sensitivity | acrylic acid | sensitivities |
| Recommended Storage Temperature | 15°C – 25°C (not lower than 10°C and not higher than 50°C) | |
| validity period | 12 months in original packaging | |
| wrap | 10g 25g 50g 60g 100g 200g 250g 500g 1KG 5KG 25KG (customized packaging according to customer requirements) | |
Reviews
There are no reviews yet.