Layered Resin Rings: How to Create Gradient or Glitter Effects
Layered Resin Rings: How to Create Gradient or Glitter Effects
Ready to take your UV resin rings up a notch? Adding gradient colors or sparkling glitter layers can transform a basic ring into a dazzling statement piece. And the best part? It’s easier than it looks!
In this beginner-friendly tutorial, we’ll show you step-by-step how to create stunning layered rings using RWAtelier UV resin. Whether you love soft ombré fades or bold glitter sandwiches, this method is all about layering slowly and curing carefully.
What You’ll Need
– RWAtelier UV Resin (clear or tinted)
– UV lamp (24W or higher)
– Silicone ring molds (flat-top or open-top work best)
– Resin pigments, mica powder, or alcohol ink
– Glitter, gold foil, or dried flowers (optional)
– Mixing cups and stir sticks
– Tweezers, gloves, and a face mask
– Sandpaper or nail file
– Clear topcoat resin (optional, for dome finish)
Step-by-Step Guide
1. Set up your workspace**: Cover the table and wear gloves/mask.
2. Clean your mold: Make sure it’s dry and lint-free.
3. Mix your first color: Pour a small amount of resin into a cup, add color, and stir slowly.
4. Pour the first layer: Add 1–2mm of resin to the mold and let it settle.
5. Cure under UV light: Cure the first layer for 1–2 minutes.
6. Add the next color layer: Pour gently to avoid disturbing the cured base.
7. Repeat for more layers: Build up your design slowly—ombre, stripes, or glitter mixes.
8. Final layer: Top with clear resin or sparkle mix.
9. Final cure and demold: Cure for 2–5 minutes and gently demold.
10. Finishing touches: Sand edges and optionally dome with another resin coat.
Pro Tips
– Keep each layer thin to ensure full curing.
– Transparent molds work best for even UV penetration.
– Let each layer cool slightly before pouring the next.
With RWAtelier’s high-quality UV resin, your layered rings will shine bright with vibrant color and clarity. Take your time, experiment, and most of all—have fun!
